Compact
One case. One part number.
The complete generator kit consolidates into a single 28.25 by 28.25 by 26.5 inch outer box — a shape that palletises, stacks and travels as one line item.
28.25" × 28.25" × 26.5" HOuter box
TEEL SUPPLY CORP. — 154-6786-502/A
Portable Extended Runtime Generator
A complete 2.2 kilowatt generator kit — engine, five-gallon external fuel system, tools and weatherproof cover — cased, foamed and verified field ready as one part number.
01 / Capability
Four properties the kit was built around — and the hardware that delivers each one.
One case. One part number.
The complete generator kit consolidates into a single 28.25 by 28.25 by 26.5 inch outer box — a shape that palletises, stacks and travels as one line item.
28.25" × 28.25" × 26.5" HOuter box
Opens straight into work.
Precision-cut closed-cell foam holds every component in a known position, so the kit is inventoried at a glance and repacks the same way it shipped.
12 itemsKitted and numbered
Unpack and run.
A five-hour engine break-in is completed before the kit ships, and a digital hour meter records everything after that. Every unit carries its own part and serial number.
5 hrEngine break-in completed
Tested and verified field ready.
A weatherproof cover shields the unit from rain, dust and debris while the clear window keeps the control panel readable — power stays supervised without being uncovered.
57–65 dBAQuarter load to rated load
02 / Inspection
Drag or swipe the image to change view · ← → on the view tabs · select a marker for detail
Identification plate
Serialized identification plate with part number.
Recoil starter
Manual pull start, recessed into the housing so nothing snags in transit.
Choke lever
Cold-start choke, immediately below the starter grip.
Engine switch
ON / OFF control for the engine, marked directly into the housing.
Carry handle
Moulded grab bar over the deck — the unit lifts out of the foam by hand.
DC 12 V · 3 A
Direct-current outlet, system floating. Three amps at twelve volts.
AC 120 V · 15 A
Two household outlets, neutral floating. Rated current 15 A, maximum 18.3 A.
AC 120 V · 30 A
Twist-lock outlet, neutral floating, for higher-draw single connections.
Output indicator
Load and status indication, with economy-throttle and boost-mode controls alongside.
Engine air outlet
Moulded louvre stack — the inverter’s cooling exhaust path.
Onboard tank · 1.1 gal
Integral gasoline tank with E–F level marking. The five-gallon container extends beyond it.
Captive thumb screws
Two lanyard-tethered fasteners hold the panel. Nothing to drop in the field.
Service panel
The whole side comes away for maintenance — spark plug and air filter service happen behind it.
Captive thumb screws
Two lanyard-tethered fasteners hold the panel. Nothing to drop in the field.
Cooling louvres
Moulded intake stack in the upper housing.
Oil service point
Marked 10W-30, matching the SAE 10W-30 oil, funnel and measuring bottle in the kit.
Isolating feet
Rubber feet damp vibration on hard standing.
Clear window
The panel stays readable with the cover on — outputs and indicators supervised without uncovering the unit.
Cover shell
Protects the generator from rain, dust and debris.
Fitted skirt
Shaped to the housing so the cover stays put and the air outlet stays clear.
03 / Extended runtime
The generator carries a 1.1 gallon onboard tank. The kit adds a five-gallon external fuel system that quick-connects to it — the brochure figure for runtime is 60 hours.
TS-205K
External fuel tank for extended-runtime operation. Military grade — A-A-59592 compliant.
TS-202K
Clean, spill-resistant fuel transfer into the external fuel tank or directly into the generator.
TS-206K
Fuel hose assembly with quick connect. Connects external fuel to the generator.
TS-207K
Quick-connect fitting for the extended-run fuel hose, replacing the standard fuel cap.
TS-204K
Powered by the external fuel tank for extended-runtime operation.
Illustrative model — see note below
60hrs
Estimated runtime
Verified: runtime of 60 hours with the five-gallon external fuel system, and 57–65 dBA from quarter load to rated load. Intermediate values shown above are an illustrative inverse-load model anchored to those published figures — they are not measured data and should not be used for planning.
04 / Kit manifest
Every component is numbered, described and packed to a fixed position in the foam. Select a line to inspect it.
TS-201K
Roto-molded case with secure latches and recessed handles for relieable transport.
TS-202K
Clean, spill-resistant fuel transfer into the container or the generator tank.
TS-203K
Precision-cut closed-cell protective foam. Designed for a compact, secure fit.
TS-204K
Inverter generator, owner’s manual included. 2,200 watts maximum, 1,800 watts rated.
TS-205K
External fuel tank for extended-runtime operation.
TS-206K
Fuel hose assembly with quick connect. Connects external fuel to the generator.
TS-207K
Quick-connect fitting for the extended-run fuel hose, in place of the standard cap.
TS-208K
Tools included: 3/8" drive ratchet, 13/16" deep socket (for spark plug), spark plug, air filter.
TS-209K
Non-removable instruction cards attached to the generator for quick reference in the field.
TS-210K
SAE 10W-30 oil, funnel and graduated measuring bottle for the first service.
TS-211K
Three-way 120V AC adapter for powering multiple devices from a single outlet.
TS-212K
Protects the generator from rain, dust and debris — with a clear window over the panel.
ItemPartDescription
| Item | Part number | Item description | Qty |
|---|---|---|---|
| 1 | TS-201K | Protective case | 1 |
| 2 | TS-202K | Spout cap funnel hose | 1 |
| 3 | TS-203K | Foam insert | 1 |
| 4 | TS-204K | 2.2 kW generator (owners manual included) | 1 |
| 5 | TS-205K | External Fuel Tank, 5 gallon | 1 |
| 6 | TS-206K | Fuel transfer hose assembly | 1 |
| 7 | TS-207K | Quick connect fuel cap | 1 |
| 8 | TS-208K | Utility bag, maintenance kit | 1 |
| 9 | TS-209K | Instructions (attached to generator) | 1 |
| 10 | TS-210K | Oil (SAE 10W-30), funnel, measuring bottle | 1 |
| 11 | TS-211K | Splitter cable, adapter | 1 |
| 12 | TS-212K | Weather proof cover | 1 |
05 / Case & deployment
The readiness story the case tells — from a latched transport shell to a running generator on an external fuel supply.
S1 / S5
Roto-molded case with secure latches and recessed handles for reliable transportation.
28.25"L x 28.25"W x 26.5"H
S2 / S5
One case, one part number, one line on the manifest — with the complete twelve-item kit inside it.
S3 / S5
Precision-cut closed-cell foam presents every component in a known position. See everything at a glance, not a checklist.
S4 / S5
The transfer hose and quick-connect cap tie the five-gallon container to the generator for extended-runtime operation.
S5 / S5
Up to 60 hours of runtime, 1,800 watts rated and 2,200 watts maximum, from a unit that has already completed its five-hour break-in.
1 / 5
06 / Specifications
Published figures for the Remote Power Kit, as printed on the product brochure.
07 / Teel Supply
Deployable power solutions built for mission needs.
Custom kits of power supplies, tools, and specialty items.
Collaborative engineering to solve complex requirements.
Rapid prototyping and pilot builds to validate solutions.
Precision fabrication and integration to spec.
Expedited sourcing and emergency procurement when it matters.
Secure, reliable logistics and expedited delivery.
08 / Contact